| Boat Dock Works |
 | |  | |  | |  | |  |
| Boat Dock Works 327 High Street SE Gainesville, GA 30501 Phone (770) 540-1775 Fax (770) 532-3409 E-mail BoatDockWorks@yahoo.com |
Only the best!
Boat Dock Works
Boat Dock Works
Boat Dock Works
Boat Dock Works is committed to using only
the finest materials available in the
construction of their heavy duty rigid docks.
All materials are cut in custom jigs for precise
fits. Any and all joints are beveled before
welded. Steel frame consists of 12'' all welded
bar joists which are constructed of 2''x2''x1/8"
angle iron and 1/2"x1/2" solid square bar.
Double 2"x2"x3/16" square tubing is used for
up right construction. Roof joists usually
consist of 2"x4" or 2"x6" structural rectangular
tubing. Custom picketed handrails and/or
bench seats wrap upper deck.
Our in house paint process consists of a complete acid wash, epoxy primer, and two coats of gloss enamel automotive paint, entirely sprayed, for the finest paint finish in the industry. Hot dipped galvanized finish is also available.
The entire steel frame is set on 10 year
Shoremaster encapsulated flotation which is
fastened by 1/4" stainless bolts. Docks sit
high (approximately 10") and level. Roofing
material is 26ga. All decking is screwed down
and trimmed in bumper material. Anchoring
includes 4" steel anchor poles with wenches
and/or shoreline anchor system. All cable and
hardware is stainless. Hinges and high stress
points are always double reinforced.
Once again, thank you for the opportunity to
offer you the finest dock on the market.
the finest materials available in the
construction of their heavy duty rigid docks.
All materials are cut in custom jigs for precise
fits. Any and all joints are beveled before
welded. Steel frame consists of 12'' all welded
bar joists which are constructed of 2''x2''x1/8"
angle iron and 1/2"x1/2" solid square bar.
Double 2"x2"x3/16" square tubing is used for
up right construction. Roof joists usually
consist of 2"x4" or 2"x6" structural rectangular
tubing. Custom picketed handrails and/or
bench seats wrap upper deck.
Our in house paint process consists of a complete acid wash, epoxy primer, and two coats of gloss enamel automotive paint, entirely sprayed, for the finest paint finish in the industry. Hot dipped galvanized finish is also available.
The entire steel frame is set on 10 year
Shoremaster encapsulated flotation which is
fastened by 1/4" stainless bolts. Docks sit
high (approximately 10") and level. Roofing
material is 26ga. All decking is screwed down
and trimmed in bumper material. Anchoring
includes 4" steel anchor poles with wenches
and/or shoreline anchor system. All cable and
hardware is stainless. Hinges and high stress
points are always double reinforced.
Once again, thank you for the opportunity to
offer you the finest dock on the market.
One of Boat Dock Works
most important suppliers is
to visit their web site click
on the link.
most important suppliers is
to visit their web site click
on the link.
| Created and maintained by Gena Hansen Web Design |
About Us